Soft Starter New

ATS48D88Q soft starter


ATS48D88Q soft starter
ATS48D88Q soft starter

ATS48D88Q soft starter    ATS48D88Q soft starter
Heavy duty industry and pumps. 230...415 V - 15...10 %. 55 kW at 400 V connection to the motor delta terminals for severe applications 75 kW at 400 V connection to the motor delta terminals for standard applications 18.5 kW at 230 V connection in the motor supply line for severe applications 22 kW at 230 V connection in the motor supply line for standard applications 37 kW at 230 V connection to the motor delta terminals for severe applications 37 kW at 400 V connection in the motor supply line for severe applications 45 kW at 230 V connection to the motor delta terminals for standard applications 45 kW at 400 V connection in the motor supply line for standard applications. 245 W for severe applications 290 W for standard applications. Start with torque control (current limited to 5 In). 88 A for connection in the motor supply line for severe applications 88 A for connection in the motor supply line for standard applications 152 A for connection to the motor delta terminals for severe applications 152 A for connection to the motor delta terminals for standard applications. 50...60 Hz - 5...5 %. To the motor delta terminals In the motor supply line. 220 - 15 % to 415 + 10 %, 50/60 Hz. (LO1) logic output 0 V common configurable (LO2) logic output 0 V common configurable (R1) relay outputs fault relay NO (R2) relay outputs end of starting relay NO (R3) relay outputs motor powered NO.

10 mA at 6 V DC for relay outputs. Logic output 0.2 A at 30 V DC Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms. PTC, 750 Ohm at 25 °C (Stop, Run, LI3, LI4) logic. Positive logic Stop, Run, LI3, LI4 at State 0. 11 V, >= 5 mA.

0.4...1.3 Icl adjustable. Current output AO: 0-20 mA or 4-20 mA, impedance.

4800, 9600 or 19200 bps. Phase failure: line Thermal protection: motor Thermal protection: starter. 1525 kW at 200240 V 3 phases 3050 kW at 200240 V 3 phases 3050 kW at 380440 V 3 phases 55100 kW at 380440 V 3 phases. Conducted and radiated emissions level A conforming to IEC 60947-4-2 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5.

CCC CSA SEPRO UL C-Tick GOST NOM 117 TCF DNV. 1 gn (f= 13200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 213 Hz) conforming to EN/IEC 60068-2-6. 15 gn for 11 ms conforming to EN/IEC 60068-2-27.

Level 3 conforming to IEC 60664-1. 095 % without condensation or dripping water conforming to EN/IEC 60068-2-3. Ambient air temperature for operation. 4060 °C (with current derating of 2 % per °C) -1040 °C (without derating). Ambient air temperature for storage. 1000...2000 m with current derating of 2.2 % per additional 100 m. Unit Type of Package 1. Number of Units in Package 1.

The item "ATS48D88Q soft starter" is in sale since Wednesday, September 2, 2020. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\PLCs & HMIs\PLC Processors". The seller is "anas1982sassi" and is located in Genève.

This item can be shipped worldwide.
  1. MPN: Does Not Apply
  2. Brand: Schneider

ATS48D88Q soft starter    ATS48D88Q soft starter